DIY Wooden Star Ornaments

diy_huntress_wooden_star_ornament-15
Thanksgiving is over, which means it’s time to blast the Christmas music and bust out the ugly Christmas sweaters! I officially feel ready to start posting about the holidays (yes, I have a strict, no-holiday-stuff-before-Thanksgiving rule and no, I’m not sorry)! Now that I’m finally in the holiday spirit, I’ve been inspired by so many festive items hanging around in stores. But, being that my pockets are empty, I’ve vowed to make most of my scrap pile, rather than buying anything new. 

One of the things I’ve been eyeing up has been 3D ornaments. They’re so awesome! But, now that I have a scroll saw, I’ve been wanting to create my own… so, I did. Best part is, I used scrap wood and an already-used can of Varathane wood stain for this project. So, it cost way less than if i were to buy any! Here’s how I did it.

*Disclaimer: This post uses affiliate links. If you chose to purchase an item through these links, you will not be charged extra, but a portion of your sale will be used to support DIY Huntress so I can continue to provide you with free plans!

What You’ll Need

diy_huntress_wooden_star_ornament
Tools:
Scroll Saw or Band Saw
Sander/Sand Paper
Drill
Sharpie
Scissors

Materials:
Plywood
Holiday Printout
Wood Adhesive
Wood Stain
String

The Steps

1. Print out my free ornament printable on standard printer paper.

star-ornaments
2. Cut out your stars.

diy_huntress_wooden_star_ornament-2
3. Trace your stars onto the plywood.

diy_huntress_wooden_star_ornament-3
4. Once traced, use your band saw or scroll saw to cut out your stars.

diy_huntress_wooden_star_ornament-4
5. After cutting your stars out, pair up your same sized stars. You will use the edge of one star to create a thick outline on the other. This is where you will cut out your channel to slide the stars together later.

diy_huntress_wooden_star_ornament-5
6. Use the saw to cut out the channels.

diy_huntress_wooden_star_ornament-8
7. Run a dry fit and sand down all of the rough edges.

diy_huntress_wooden_star_ornament-9
8. Stain all of your pieces. I used Varathane Wood Stain in Ash for mine!

diy_huntress_wooden_star_ornament-10
9. Once dry, apply wood glue to the openings in the stars (I used DAP Rapid Fuse Wood Adhesive for mine and they dried so fast!). Once you’ve added the adhesive, slide the stars together.

diy_huntress_wooden_star_ornament-11diy_huntress_wooden_star_ornament-12
10. Finally, use a drill to create a hole in the star for your thread.

diy_huntress_wooden_star_ornament-13
You’re done!

diy_huntress_wooden_star_ornament-16
This project was an easy fix for a bare tree! I love the way they pop! I also love that they didn’t break the bank or burn a hole in my pocket either (massive scrap wood pile for the win)!

diy_huntress_wooden_star_ornament-14
What do you think!? Will you be seeing stars in the near future? If so, please make sure to share them with me on social media – I’d love to see them!

There are tons of cool holiday projects coming up in the next few weeks, so be on the lookout! Until then…

HappyDIY-2** A huge holiday thank you DAP Products Inc. for sponsoring this post & Rust-Oleum for providing me with stain. While their products are awesome, all decorative ideas, opinions, and holiday jokes are of my own. 

Leave a Reply

Your email address will not be published. Required fields are marked *