DIY Easy Wooden Frame

How To Make An Easy Wooden Frame

After months of not having a proper home for our favorite polaroid picture, I decided it was time to tap into my scrap pile and create something fun and functional. Luckily, my friends at T-Rex Tape made an awesome double sided tape that fit the bill. Hence, the easiest frae project in the whole wide world. Ready to make a frame in less than 30 minutes? Let’s do this.

I mean it you guys, this frame is so easy to make, even a cave man can do it (if a caveman had a miter saw, but you get what I’m saying).

This post contains affiliate links. For my full disclaimer policy, click here

What You’ll Need:

T-Rex Double Sided Tape

Tools

Miter Saw
Sanding Block
Paint Brush or Rag
Tape Measure
Pencil

Materials

1″ Thick (or More) Wood
T-Rex Double Sided Tape
Polyurthane

The Steps:

1. Measure your frame. I used mine for a polaroid picture, so it made sense to make my frame a square. Therefore, I measured my frame at 5 ¾ x 5 ¾”.

2. Use your miter saw to cut your frame.

DIY Walnut Wood Frame

3. Sand down rough edges.

How To Build A Picture Frame

4. Use wipe-on or paint-on poly to seal the frame.

Walnut Picture Frame

5. Once dry, cut strips of double sided tape and attach them to the frame.

How To Make A Floating Frame

6. Peel the protective film away and attach the photo to the wood frame.

DIY Floating Frame

Polaroid Picture Frame

That’s it! I promised this would be easy!

Wooden Polaroid Picture Frame

Hope you guys like this project enough to make your own! If you do, please feel free to share it on social media by tagging it to #diyhuntress!

Until next time…

* This project is sponsored by T-Rex Tape. All opinions, design ideas, and cheesy poses for photos are my own.

2 Comments

Leave a Reply

Your email address will not be published. Required fields are marked *