Skip to content
  • About
  • Blog
  • Archives
  • YouTube
  • Apparel
  • Plans
  • Policies
  • Contact
  • About
  • Blog
  • Archives
  • YouTube
  • DIY Huntress

  • Apparel
  • Plans
  • Policies
  • Contact

How to Make DIY Geometric Wood Wall Art

April 30, 2026April 30, 2026 Sam 26 comments
How to Make DIY Geometric Wood Wall Art
geometric wood art

Sometimes it takes a lot of searching to find the perfect piece of art for your space. But when you can’t find exactly what you’re looking for, sometimes the best option is to just make it yourself. Can you relate?

Not only can you customize it with the exact colors and materials that fit your style, but you can also do it on a surprisingly small budget. I made this geometric wood art for under $50, and it ended up being exactly what the space needed.

How To Make Geometric Wood Art

So, this piece is pretty big. Like, 2 feet tall and 4 feet wide, big. But, there were a few steps along the way that made this project a lot easier than you’d think. Overall, this project took me only 2 work days to create!

how to make geometric wood art

One of the things that I was nervous about when I created this piece was how long it would take me to paint all of the tiny pieces. But, because I used the HANDy Pro Pail, I was able to set up a painting station to help streamline the entire process! You can check it out in the tutorial below!

What You’ll Need:

how to make wood art

Tools
Miter Saw
Circular Saw
Nail Gun
(3) HANDy Pro Pail
(3) HANDy Pro Pail Liners
Tape Measure
(3) Paint Brushes
Sander/Sanding Block
Straight Edge

Materials
(1) Lath Bundle (50 Pieces)
12 Foot Long ½ x ¾” Trim
Half Sheet ½” Plywood
¾” Brad Nails
Wood Glue
Light Brown Stain
Dark Brown Stain
White Paint

The Steps:

1. Use a straight edge and your pencil to divide your sheet of plywood into four sections. This will help make sure everything is even when you are working.

how to make art

2. Cut the end of one lath at 45 degrees. This will be used as your stencil.

build wood art

3. Use your stencil to begin tracing out your design.

how to create a wood art piece

4. To create the small sections in the middle, use your straight edge to create small lines that intersect your longer lines. I started mine about 3 inches up and moved up my lines at 1″ intervals.

how to make plywood art

5. Once you are happy with your layout, begin cutting pieces for the design. All cuts are made at 45 degree angles. Use a pencil to mark an estimate for your overhangs. These don’t need to be perfect, as they will be trimmed down later.

how to cut lath wood

6. If your lath pieces are rough, use a sander to sand away the imperfections.

create wood centerpiece

7. Decide what colors you wish to use (kind of like a giant paint-by-numbers) and mark them in the design to make matching pieces easier as you go.

make southwestern art

8. Use yourHANDy Pro Pails to create a painting station! I used 3 pails and dumped my paint in the liners of each one. I also made sure to designate one paintbrush per pail and let them hangout on the awesome magnets that are included in each one!

how to make tri color art

9. Now life gets easy! As you cut, and decide what colors you’d like to use, bring your pieces to your paint station and begin adding color!

I started with my white pieces first…

how to paint wood more than one color

and then moved on to my stains!

how to stain wood

10. Allow your pieces to dry, and then begin adding them to your artwork with wood glue and brad nails!

how to make art from plywood

11. Continue to add as you go!

southwest geometric art

12. If you need to do any touching up, grab your HANDy Paint Pail and  bring it over to your piece. I used a small detail brush for touching up pieces that were damaged in the process.

multicolor wood art

13. Once your piece is complete, use a circular saw and a track or straight edge to cut away the uneven ends. This will make the piece perfectly straight all the way around.

track saw

14. Next, cut and add your frame pieces with brad nails and wood glue. I stained mine to match the lighter color from the arrows. You will need:

(2) 24″ Short Frames
(2) 49″ Long Frames

how to add border to plywood

15. Last, add your wall hangers!

how to hang plywood

Now hang that artwork and admire your job well done!

southwestern art

How’s that for a budget friendly statement piece!?

rustic art

Proof that you don’t need to spend a ton to have a statement piece of art. This DIY geometric wood art completely transformed the space for under $50, and the best part is that it’s totally customizable. If you’ve been searching for the perfect wall art, this might just be your sign to make it yourself. There’s something really special about filling your home with pieces you’ve made yourself.

Love the idea, but don’t have the space yet? Make sure to save this idea for later on Pinterest!

I hope I have inspired you guys to get busy and make some art for your home! Get out there and make something cool and share it with me on social media. I love checking out your projects! In the meantime…

* This post is sponsored by HANDy Paint Products. Although I am receiving compensation for this post, all opinions are my own. This post complies with the Word Of Mouth Marketing Association (WOMMA) Ethics Code and applicable Federal Trade Commission guidelines.

OTHER PROJECTS YOU MAY LIKE

  • DIY Huntress Murphy Table
    How to Make a Murphy Table (That’s Also Art!)
  • Sam Featured Photo Ratio (2)
    Easy DIY Projects to do Over the Holiday Break
  • Sam Featured Photo Ratio
    Easy DIY Gifts for the Holidays
  • hosting for the holidays
    DIY Hosting Hacks For The Holidays
  • dream bedroom makeover
    Finishing Our Dream Bedroom After a Year of Renovations
  • image-1
    5 Easy DIY Projects for Beginners
home decorsponsoredunder $50woodworkwoodworking

Related Posts

DIY Faux Brick Wall: Create an Authentic Industrial Loft Look
DIY Faux Brick Wall: Create an Authentic Industrial Loft Look
DIY Luxury Furniture For Cheap
DIY Luxury Furniture For Cheap
Finishing Our Dream Bedroom After a Year of Renovations
Finishing Our Dream Bedroom After a Year of Renovations
DIY Modern Sliding Barn Door
DIY Modern Sliding Barn Door

Post navigation

DIY Custom Built-Ins for a Small Walk-In Closet
Quick and Easy Backyard DIY

26 comments

  1. Fred says:
    September 6, 2017 at 9:11 PM

    Nice job Sam! 👍

    Reply
    1. Sam Raimondi says:
      September 12, 2017 at 8:47 PM

      Thanks Fred!

      Reply
  2. Tom says:
    December 27, 2017 at 9:15 AM

    Nice work!
    Just a question…assuming 1/4” thick lath, 1/2” thick ply, but you used 1” brad nails…did they not stick through the back of the ply?

    Reply
    1. Sam Raimondi says:
      January 1, 2018 at 2:27 PM

      Ah! Good catch! I used 3/4″ nails. My lath strips came in the bundle at mostly 3/8″ thick. I’ll fix now – thanks!

      Reply
  3. Colton says:
    February 23, 2018 at 5:09 PM

    So I planned to do this a while back, but this lath bundle isn’t available and other bundles I’ve seen aren’t readily available at my store. Any thoughts on other options that are also budget friendly?

    Reply
    1. Sam Raimondi says:
      March 19, 2018 at 9:53 PM

      Hi Colton! Had a few people make this piece using 1×2 pine boards! You can get 6-8 foot boards for right around $6 a board at Home Depot.

      Reply
      1. Parker says:
        June 28, 2020 at 4:52 PM

        this was my question too. thank you! this is going to be my first “big” wood working project and i am terrified. any beginner tips?

        Reply
  4. Megan says:
    March 10, 2018 at 12:16 PM

    Can you share what brand and name of paint/stains you used!?!? I’m in love!

    Reply
  5. Abi Stern says:
    April 21, 2018 at 12:24 PM

    @sam Raimondi This looks amazing!! Loved it so much that I am half way through making this one! All the pieces are cut and the white pieces are painted.

    The hardest part is to choose the which wood stain to use. Do you remember which one did you use? I get quite overwhelmed with all colours out there.

    Thanks a lot!

    Reply
  6. Lisa says:
    April 28, 2018 at 1:27 PM

    This really looks great! Amazing that just plain old wood can result in this in the end. Can play with different shapes and stains and cuts and sizes! Very inspiring, thank you for sharing!

    Reply
    1. Sam says:
      April 29, 2018 at 6:20 PM

      Thank you so much for the love! So happy you like it!

      Reply
  7. Renee says:
    October 9, 2018 at 10:36 PM

    Where did you get the wood lath? I can’t seem to find it at Home Depot, Lowe’s or Menards!

    Reply
    1. Sam says:
      November 1, 2018 at 9:33 AM

      Hi! I got it as a gift for the holidays last year – it’s a Central Machinery benchtop lathe. Hope that helps!

      Reply
  8. Anna Sue Kramer says:
    April 12, 2019 at 10:43 AM

    This is exactly what kind of tutorial I have been searching for. Thank you!!

    Reply
    1. Sam says:
      April 16, 2019 at 9:41 PM

      Glad you found it! Good luck on your project!

      Reply
  9. Cole Gilbert says:
    March 30, 2020 at 9:38 PM

    Did you have extra lath

    Reply
    1. Sam says:
      April 5, 2020 at 5:11 PM

      I want to say yes, but I don’t remember 100%!

      Reply
  10. Joelle says:
    April 3, 2020 at 5:33 PM

    I just picked up 2 bundles of wood lathe for this project from Home Depot! They are all pretty gnarly. Did you just sand yours down to look so nice?

    Reply
    1. Sam says:
      April 5, 2020 at 5:10 PM

      Yeah… they’re in rough shape. I just sanded mine until I was happy with them!

      Reply
  11. Ec says:
    April 21, 2020 at 3:33 PM

    I really love this project, but I don’t love the nail look. Do you need to use brad nails or can a good wood glue and clamps work?

    Reply
    1. Sam says:
      April 24, 2020 at 4:44 PM

      You can use glue and clamps! It might take longer, but could be worth it.

      Reply
  12. Jamie says:
    May 10, 2020 at 12:44 PM

    I’m assuming the half sheet of plywood made it 2’x4’? Thanks for much for this! I’m excited to give it a try

    Reply
    1. Sam says:
      May 11, 2020 at 7:48 PM

      Yes! A full sheet is 4×8′. So excited to see it!

      Reply
  13. seeding says:
    May 13, 2026 at 2:27 AM

    This looks so beautiful! It’s amazing how ordinary wood can turn into something like this.

    Reply
  14. seeedly says:
    August 1, 2026 at 1:52 AM

    That’s so impressive! I love it so much.

    Reply
  15. seeding2u says:
    September 24, 2026 at 2:50 AM

    I really love this idea. It matches the room perfectly.

    Reply

Leave a Reply Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Hey, Friends!

Hey, Friends!

Sam Raimondi

Welcome to my website! Here you'll find approachable DIY projects that you can complete on tight timelines and with tight budgets!

YOUTUBE

https://youtu.be/tIb58R1yHiA

PROJECT PLANS

Find printable, PDF plans for my woodworking projects in my online store!

Shop Now
PROJECT PLANS

Categories

  • Camper Van
  • Crafting
  • Holidays
  • Home Improvement
  • Metal Working
  • Room Makeovers
  • Search
  • Tool School
  • Woodworking

Subscribe

Stay up to date via our weekly newsletter.

Popular Posts

Home Improvement ➤ June 24, 2026

Building A Floating Deck + Grill Station (In One Weekend)!

Looking for a dedicated grill station? Build a floating deck for your grill in just one weekend of work! I have wanted to purchase a grill for our backyard since the day we closed on...

Read More
Home Improvement ➤ April 13, 2026

Easy DIY Deck Privacy Wall

Winter was way too long this year but we are living for the warmer weather that's started to creep back in. There's truly no better way to mark the warmer seasons than to tackle an outdoor project. I always get questions on the privacy wall that I built around my deck and it's still one of my favorite parts of my outdoor space. It deserves it's own moment to shine in the sun. Take a look at how I did it!

Read More
Woodworking ➤ June 24, 2026

DIY Outdoor Dining Table (IN ONE DAY)

It’s outdoor season, which means we’re looking at all the projects we can tackle outside. For this build, we teamed up to make a DIY outdoor dining table for DIY Danie's backyard, and I love how it came together. This project is beginner-friendly, and totally doable in a weekend, or one very productive day with a friend.

Read More
Home Improvement ➤ June 29, 2026

DIY Easy Storage Shelf (For The Side Of My Fridge)!

Need a little extra storage in your kitchen? Make use of that empty space beside your refrigerator by building an easy DIY storage shelf. It’s perfect for organizing cutting boards, wine bottles, and all those miscellaneous kitchen items that never seem to have a home. Best of all, you can knock this project out in one weekend or less!

Read More
  • About
  • Blog
  • Archives
  • YouTube
  • Apparel
  • Plans
  • Policies
  • Contact
© 2026 | diy huntress